Contrec 515 – BC03 Mass Batch Controller

  • process controller

Frequency or Analog Input Batch Controller, Tailored for Inputs from Mass Flow Meters

The 515 BC03 application is a dual stage mass batch controller for reliable measurement of preset quantities using a mass frequency or analog input. Used as a single or dual stage controller it is suitable for fast batch applications.

It provides the operator with clear local readout and can be controlled via communications in more automated systems. There is quick access to commonly used preset values directly from the front panel if access has been authorized. Automatic overrun compensation caters for system delays such as valve closure for precise volumes.

The BC03 Mass Batch Controller is compatible with a wide range of flowmeter outputs, including millivolt signals, reed switches, Pulse, Namur proximity switches and analog signals. Inputs can be scaled, filtered and have non-linear correction applied. Square law and cutoff points can also be applied to the analog input.

CALCULATIONS

If using the frequency input, the total and flowrate are derived from accurately measured frequency and the number of received pulses.

mass = pulses / k-factor

mass flow = frequency / k-factor

If using the analog input, to derive the flow rate the input is normalised to a value (A) between 0 and 1. 

massflow = (Mƒmax-Mƒmin) A + Mƒmin

mass = ∫(massflow . Δt)

Automatic overrun compensation calculates the new valve closure point to ensure correct delivery by averaging the overrun amount from the last three complete batches.

The overrun compensation value is valid for a new preset value provided the stored overrun is less than 20% of the new preset.

If you require a volume frequency/analog input please see our BC01 Dual Stage Batch Controller